BPE Fittings

Sanitary BPE Fittings and Tubings are the best choice for pharmaceutical industry which requires high purity very much. BPE fittings have much more strict requirements on its material, welding, polish and so on. By controlling raw material strictly in producing BPE fittings, Wellgreen sanitary is assuredly capable of supplying qualified hygienic BPE Fittings comply to your condition and FDA,GMP requirement.

Products:

Material:

Stainless Steel 304,316L or en.1.4301, 1.4404 etc. Specified grade is available.

Strength:

  • Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties of BPE fittings. Material certificate will be submitted follow to orders.
  • Heat Treatment of solution annealing for the tube and fittings are available. The heat treated will be relief stress which caused by cold forming of fabrication, to improve the corrosion performance.
  • Fast delivery is possible to meet your needs well in time.
  • Low cost from bulk production will reduce your budget and improve your business.
  • Small quantity available.

Quality & Inspection:

  • PMI test to verify material grade
  • Dimension controlling during fabricating and finished
  • Visual and surface 100% examination before shipment
  • End protected for shipment
  • Packed in carton box firstly, then in wooden case

Polishing Opinion:

Mechanically polished is our general surface process for BPE fittings, also electropolished is available for us. Outside and Inner surface can be treated complied to specified needs, and to meet FDA, GMP requirement.

  • Tube and Fittings:  SF1, SF4, SF2, SF3 or Ra0.5, Ra0.6, Ra0.8  or specified.
  • Both outside and inner available.

Application:

Food, Brewery, Beverage, Dairy, Pharmaceutical, Biopharm etc.

BPE Fittings – Sanitary Fittings – Stainless Steel Tube Fittings
Size 1/4″ thru 6″
Material T304, T316L, EN 1.4301, EN 1.4404 etc.
Standard ASME BPE
End Connection Tri-clamp, Butt Welding etc.
Surface Descaled finish, Mirror polished
Gasket PTFE, EPDM, Buna-N, Silicone gaskets etc.
Application Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc.
How to order
  • Part Name
  • Dimension
  • Material
  • Quantity
  • Polish requests for OD/ID

Table of DT-6 Tolerances for electropolished BPE fittings and process components.

Norminal

Wall Thickness

Size(inch)

inch

mm

1/4″

+0.003/-0.006

+0.08/-0.15

3/8″

+0.003/-0.006

+0.08/-0.15

1/2″

+0.005/-0.010

+0.13/-0.25

3/4″

+0.005/-0.010

+0.13/-0.25

1″

+0.005/-0.010

+0.13/-0.25

1 1/2″

+0.005/-0.010

+0.13/-0.25

2″

+0.005/-0.010

+0.13/-0.25

2 1/2″

+0.005/-0.010

+0.13/-0.25

3″

+0.005/-0.010

+0.13/-0.25

4″

+0.008/-0.012

+0.20/-0.30

6″

+0.015/-0.017

+0.38/-0.43

*For more information and specification about ASME BPE Fittings, please contact us here.

Related Products